近年来，断桥铝门窗在现在很多家庭中应用的是比较多的，随着现在人们对生活质量要求变高，断桥铝门窗在安装时就需要有专业的安装团队，但是在检查安装质量是否有保证时，在那些地方能看出来呢？

In recent years, broken bridge aluminium doors and windows are widely used in many families. With people's higher requirements for the quality of life, broken bridge aluminium doors and windows need professional installation team when they are installed. But when checking whether the installation quality is guaranteed, where can we see it?

想要看断桥铝门窗安装的是否专业，在进行安装时要按照：清理洞口-窗框调整-窗框固定-玻璃安装-窗扇安装-缝隙封修的顺序进行，下面来详细了解下：

To see whether the installation of broken bridge aluminum doors and windows is professional, the installation should be carried out in accordance with the sequence of clearing holes - window frame adjustment - window frame fixing - glass installation - window fan installation - gap sealing. The following is a detailed understanding:

1、窗框调整

1. Window Frame Adjustment

将垫块置放在下层墙上，注意测量标记；将窗框置放在窗洞内，向二侧移动校准在窗洞内的位置；校准下框的水平度，下框塞垫，同时调整与墙体连接处，及墙面平均缝隙距离；注意上框的缝隙，在竖框上端，用销钉固定框架和调整竖框与边缘的接触，使用水平仪，窗框的型材应平直在使用销钉时不要使型材变形。

Place the pads on the lower wall, pay attention to the measurement marks; place the window frames in the window holes, move to both sides to calibrate the position in the window holes; calibrate the level of the lower frame, the lower frame pads, and adjust the distance between the wall and the average gap of the wall; pay attention to the gap of the upper frame, fix the frame with pins at the upper end of the vertical frame. And adjust the contact between the vertical frame and the edge, using the level meter, the profile of the window frame should be straight when using the pin, do not make the profile deformed.

在那几点地方能看出断桥铝门窗安装的是否专业

Where can I see whether the installation of broken bridge aluminium doors and windows is professional?

2、清理洞口

2. Cleaning the hole

保证洞口没有影响安装的杂物，保证施工的正常运行。

Ensure that the opening does not affect the installation of debris, ensure the normal operation of the construction.

3、窗框固定

3. Window frame fixing

断桥铝门窗采用固定片固定方式，可吸收墙体的变形，固定片为一镀锌钢板制件，一端通过螺钉与钢副框连接，使其在连接框架与墙体时无任何张力，用射钉枪将固定片固定在墙体上，这一固定片对框架产生的横向和竖向变动力，通过型材固定部位的极微小的转动和伸缩维持平衡。

Aluminum doors and windows of broken bridges are fixed by fixing sheets, which can absorb the deformation of the wall. The fixing sheet is made of galvanized steel sheet. One end of the fixing sheet is connected with the steel sub-frame by screw, so that there is no tension between the frame and the wall. The fixing sheet is fixed on the wall by shooting nail gun. The transverse and vertical changes of the fixing sheet on the frame are caused by the fixing sheet.  Force is maintained by the slight rotation and expansion of the fixed part of the profile.

4、玻璃安装好后，安装开启扇

4. Install the opening fan after the glass is installed.

平开窗是将开启扇通过合页与固定在洞口的窗框连接；小的误差可做适当调整，情况严重的要卸下玻璃进行调整，检查断桥铝合金窗扇与窗框的吻合是否均匀，如不均匀在窗框的锁定侧进行校准。

Flat window opening is to connect the opening fan with the window frame fixed at the opening through the hinge. Small errors can be adjusted properly. In serious cases, the glass should be removed to adjust. Check whether the match between the broken bridge aluminum alloy window fan and the window frame is uniform, such as non-uniform calibration on the locking side of the window frame.

5、断桥铝门窗玻璃及窗扇安装

5. Installation of Broken Bridge Aluminum Door and Window Glass and Window Fan

框架在洞口中安装好后，进行玻璃及开启扇的安装，玻璃在加工厂已预制完成，每块玻璃都有标号图，按分格图上相应的标号位置将玻璃通过软性接触放在指定的位置框垫块上，调整玻璃的左右位置，使玻璃的左右中心线与分格的中心线保持一致，用扣条将玻璃固定在框架上。

After the frame is installed in the hole, the glass and the opening fan are installed. The glass has been prefabricated in the processing plant. Each piece of glass has a labeling map. According to the corresponding labeling position on the grid diagram, the glass is placed on the designated position frame cushion block through soft contact. The left and right positions of the glass are adjusted so that the left and right centerlines of the glass are separated. The center line of the lattice is consistent and the glass is fastened to the frame with a buckle.http://www.msd-mc.com/